硬电线与软电线的使用场所一般在哪？
Where is the use place of hard wire and soft wire?
由于软电线的抗拉力较弱、抗腐蚀较弱、抗疲劳强、废品回收率低，因而软电线适用于设备布线时的连接。
Due to the weak tensile strength, corrosion resistance, fatigue resistance and low recovery rate of waste products, flexible wires are suitable for the connection of equipment wiring.
硬电线相对于软电线来说，价格更便宜、抗拉力更强、抗腐蚀更强、抗疲劳更弱、废品回收率也高，因而硬电线一般用于电力系统，即用于埋墙、埋地，作为主线使用。
Compared with the soft wire, the hard wire is cheaper, stronger in tensile force, stronger in corrosion resistance, weaker in fatigue resistance and higher in waste recovery rate. Therefore, the hard wire is generally used in power system, i.e. for wall burying and buried, as the main line.
可见，两者其实没有谁差谁坏的区别，只有谁更适合哪个位置。所以大家可以根据装修的位置来选择硬线还是软线。一般家用建议优先考虑硬电线，这样抗氧化性能较好些，使用时间长；不过在施工的时候，如果电路转弯过多，也可以选择软电线，这样比较好穿些。
It can be seen that in fact, there is no difference between the two, only who is more suitable for which position. So you can choose hard line or soft line according to the decoration position. It is recommended to give priority to hard wires for general household use, so the oxidation resistance is better and the use time is long; however, during construction, if the circuit turns too much, soft wires can also be selected, which is better to wear.